Air Cooled Industrial Water Chiller 3HP YWC-3
1. Data Sheet of Air Cooled Industrial Water Chiller 3HP YWC-3
| Model Item | YWC-3HP |
| nominal cooling capacity | kcal/h | 6966 |
| | kw | 8.1 |
| input power | kw | 3.27 |
| power supply | 3PH~380V/50HZ |
| refrigerant | type | R22 |
| | type of control | capillary |
| compressor | type | hermetic scroll |
| | power(kw) | 2.7 |
| condenser | type | finned copper tube + low noise outer rotor fan |
| | cooling air flow (m3/h) | 3000 |
| evaporator | type | tank with coil |
| | chilled fluid flow (m3/h) | 1.39 |
| | volume (L) | 50 |
| | inlet and outlet pipe diameter (inch) | 1 |
| water pump | power (kw) | 0.37 |
| | lift (m) | 20 |
| safety protection | Compressor thermal protection, over current, high and low pressure, flow switch, phase sequence, phase-missing, exhaust overheating, anti-freezing. |
| weight | kg | 135 |
| dimension | mm | 930*520*975 |
Note: 1. Nominal cooling capacity is according to:
Inlet chilled fluid temperature: 12℃
Outlet chilled fluid temperature: 7℃
Inlet cooling air temperature: 30℃
Outlet cooling air temperature: 35℃
2. Working range:
The temperature range of chilled fluid is from 5℃ to 35℃;
Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.
It is better to use the chiller while the ambient temperature at or below 35℃.
We reserve the right to modify the above dimensions or parameters without further notice.
Our service :
Pre-sale
(1) Professional suggestions (raw material matching, machine selection, the condition of building factory, feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick)
(3) Efficient on-line service
(4) Welcome to visit our factory and production line any time, if you need, we can make invitation letter for you.
(5) Introduce the company file, product categories and production process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients side if needed.
(2) Set up, fix, and operate
(3) offer training to the operator until they are satisfied at clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time ,keep well communication with each other
Guarantee
(1)We can supply one year guarantee period for our card machines, if the client have any question ,they could contact our service department any time ,we will supply efficient service .
(2)Within one year ,if the client meet the unsolvable questions ,we can make site supporting.
|
|
Air Cooled Industrial Water Chiller 3HP YWC-3 Images
|
